Wheel aligners

TD5040T

With two front measuring heads equipped with 4 CCD sensors and two rear infra red transmitters, TD5040T makes it possible to carry out a quick and precise measurement of all steering angles on the front axle, or with two operations on front and rear axles to measure all related angles.

Thanks to the long reading distance of the measuring heads, by repeating this operation it is also possible to measure the angles on vehicles with three or more axles or steering axles.

All the characteristic angles of both vehicle axles are controlled by means of four measuring heads with 4 CCD sensors and infra-red transmission.

The light measuring heads and absence of connection cables make the system very easy to use.

The keyboard with remote-control function provides total "on vehicle" operation so the control unit only needs to be used at the start and end of test.

The wheeled control unit houses the data processing and management computer, the printer (color ink jet A4 format) and the high- resolution monitor.

Special supports on the side of the control unit permit housing and recharging the measuringhead batteries when these are not used.

Big wheels for easy movement inside the workshop.

• Data management and display program in Windows^® environment.
• Data bank with more than 20.000 vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording 20.000 jobs with search by customer name or vehicle plate number.
• Summary and comparison of diagnosis/repair values on a single screen.

Specifications