Commercial vehicle aligner

TD8080T BTH

TD8080TBTH represents the latest technology in truck alignment.

These new developed aligners feature state of the art components.

Specific truck alignment software developed with and for truck alignment specialists.

Measurement of multiple axles vehicles, thanks to an extremely easy-to-follow procedure.

Software is just as complete but is much simpler to use and has a faster flow for the operator.

Data management and display program in WINDOWS environment.

Data bank with vehicle data sheets already entered and further blank sheets to be filled.

Customer data bank for recording jobs with search by customer name or vehicle plate number.

Summary and comparison of diagnosis/repair values on a single screen.

User’s instructions by animated graphics for an immediate operation.

The wheeled control unit houses the computer, the printer and the highresolution monitor.

The paper-exit opening permits using the printer with the drawer closed.

Special supports on the side of the control unit permit housing and recharging the measuring-head batteries.

Drawer to store accessories.

Big wheels for easy movement inside the workshop.

BLUETOOTH

Faster and more reliable data transmission through Bluetooth (radio can be a problem on large vehicles).

4 REMOTE CONTROLS

Ability to operate the system from any head.

Often you are a distance from the console and this slows down the operating speed.

MODERN TECHNOLOGY

Simpler and more modern technology (most recent design compared to major competition) grants better reliability and less down-time for the end user.

LEDS

LEDS on the head lets the operator know when adjustment angle is within specification range.

8 CCD aligner

• bluetooth transmission between front heads and cabinet;
• infrared transmission between sensor heads;
• de luxe cabinet with 19" flat screen;
• front and rear heads have extended drop-down sensor frame;
• double inclinometer to allow caster ADJUSTMENT without steering;
• we recommend the new no run out clamps STDA92 enabling to skip run-out compensation procedure;
• not suitable for car wheels (minimum wheel diameter 760mm)

STANDARD EQUIPMENT

• 1 control unit complete with PC, monitor, keyboard, printer and battery-charger
• 2 Front measuring heads
• 2 Rear measuring heads
• 1 Brake pedal presser
• 1 Steering clamp

Specifications