Electromechanical four post lifts

KP440E - 442E - 174 - 175E - 118N

PERFECT LEVEL

The motors are inter-connected mechanically by line shafting and bevel gear boxes in oil bath to ensure the perfect level of the platforms and balanced load on motors regardless of vehicle position.

Only one adjustment is made during the installation, never during operation as there are no parts subject to yielding or lengthening such as cables and load bearing chains.

CE approved lift with low voltage controls.

Motor protection by thermal relay is provided to prevent burning out in case of overloading or lack of one phase.

Two lifting screws in each column (KP440E - KP440NE).

TOTAL SAFETY

Main and safety nut assembly.

Mechanical safety stop.

Upper and lower limit switches.

Safety micro-switch in case of main-nut failure.

Bevel gears in oil bath.

Automatic lubricati on of main and safety nuts and spindles is achieved by a plunger pump, one in each column, which ensures positive lubrication every time the lift is raised thus ensuring long life and smooth running.

A safety switch automatically stops motion should the lift encounter a solid obstacle during lowering.

KP440NE/24T - KP440E/20T - KP442NE/14T - KP442E/12T

The platform length and the capacity of these lifts make them ideal for busses and trucks.

Specifications

EXTENDED PLATFORMS

Maximum access to the vehicle thanks to the special concept of extended platforms, unique feature of fhe Ravaglioli range of commercial lifts.

Space is freely available to fit any part, including the engine.

KP118N - KP118NP / 13,5T

Twin-piston hydraulic/air-hydraulic wheel-free jack

Operated by means of hand-pump or airhydraulic pump (vers. NP)

Pneumatic feed pressure 6 ÷10 bar

Translation on ballbearing.

DUO - Twin lifts

KP440NE-440E-442NE-442E can be twinned as follows:

1. synchronised, therefore with the two lift platforms working at the same height;
2. in single mode, therefore with the two lifts working independently with platforms at different height.

This solution enables the lifting of particularly long vehicles but also allows, in single mode, to make the lifts work separately to service the more common vehicles, therefore granting double return on the investment.

KP174 / 6T - 3325 mm
KP175E / 10T - 3740 mm

Lifts for fork lifts.

Specifications