Info 
Leaflet (955.11kB) Accessories (2.36MB)
Automatic Tyre Changers
G850
The frame is large and reinforced, to grant the utmost rigidity to the structure and chucking table.
The gear box is installed between two steel plates, to avoid flexion during operation.
The extra height of the vertical post and tool shaft allow operation on tyres to a max. of 14" (355 mm) width.
INVEMOTOR 0-14 RPM VARIABLE SPEED
The electrical motor is equipped with an exclusive and innovative inverter, which:
- allows to regulate the chucking table rotation speed by pressing the pedal
- slows down the rotation speed as the stress on the bead increases (to avoid any damage to the tyre).
 |
Standard chucking table. |
 |
Chucking table with adjustable positioning of clamps (2 slots). |
 |
I-TYPE = BEAD-SEATER (TUBELESS INFLATOR) Models with tubeless tyre inflation system. The device is activated by a single pedal command with two positions. |
Specifications
| Technical Data | G850ELSD.20 |
G850ELSD.22 | G850ELSD.24 |
|---|---|---|---|
| Motor | 1 Ph. / 0,75 KW |
||
| Chuck rotation speed (rev/min) | 0 - 14 |
||
| Max. torque to chuck (Nm) | 1000 |
||
| External clamping | 10" - 20" |
11" - 22" |
10" - 24" |
| Internal clamping | 12" - 22.5" |
13" - 24.5" |
12" - 26.5" |
| Tool working span | 8" - 24" |
||
| Max. tyre diameter (mm) | 1050 |
||
| Max. rim width | 14" |
||
| Bead breaker cylinder power at 12 bar (kg) | 3600 |
||
| Weight (kg) | 300 |
302 |
305 |
G850ELSD.20 + PLUS 83A
