Racing tyre changers

G880NSR - G880NSR24 / RACING PLUS

The vertical arm may be adjusted to two different operating positions using the control on the front of the machine; for wheels of width up to 12" the arm in the lower position grants maximum rigidity, to avoid damage to the rim.

With the arm in the upper position it is possible to operate on wheels of width up to 15.5" (394 mm).

Arm adjustable in two positions to optimise operation according to the width of the wheel.

Special tool - suitable also for rims with protruding spokes (as VW).

Bead breaker

Jointed and shaped blade to facilitate bead breaking without damaging the rim or tyre.

Bead breaker in light alloy with double action and high power.

G880NSRI - G880NSR24I / BEAD-SEATER SERIES

Models with tubeless tyre inflation system. The device is activated by a single pedal command with two positions:

Position 1: standard inflating mode. Tyre is inflated through a line protected by a pressure limiting device, including a patented valve, allowing a safe servicing without increasing inflation time.

Position 2: beading, by means of a large quantity of pressurised air passing through nozzles built into the chuck slides.

• Twin nozzles for more powerful and improved distribution of air.
• High capacity air tank.

Specifications