Info 
Leaflet (317.64kB) Accessories (2.36MB)
Semiautomatic tyre changers
The frame is large and reinforced, to grant the utmost
rigidity to the structure and chucking table. The gear box is
installed between two steel plates, to avoid fl exion during
operation.
The extra height of the vertical post and tool shaft allow
operation on tyres to a max. of 15” (381 mm) width.
| IN | OUT | Ø MAX | ||
| G7250D.30 | VARIABLE SPEED |
10”-33” | 8”-30” | 50” (1270 mm) |
| G7250D.28 | 12”-30,5” | 10”-28” | ||
| G7250D.26 | 12”-28,5” | 10”-26” | ||
| G7250D.22 | 13”-24,5” | 11”-22” | ||
| G7250D.20 | 12”-22,5” | 10”-20” | ||
| G7250D.18 | 12”-20,5” | 10”-18” | ||
| 46” (1170 mm) |
||||
| G7246D.26 |
12”-28,5” | 10”-26” | ||
| G7246D.22 | 13”-24,5” | 11”-22” | ||
| G7246D.20 | 12”-22,5” | 10”-20” | ||
| G7246D.18 | 12”-20,5” | 10”-18” | ||
| 2 SPEED |
||||
| G7246V.26 | 12”-28,5” | 10”-26” | ||
| G7246V.22 | 13”-24,5” | 11”-22” | ||
| G7246V.20 | 12”-22,5” | 10”-20” | ||
| G7246V.18 | 12”-20,5” | 10”-18” |
I-TYPE = BEAD-SEATER (TUBELESS INFLATOR)
| IN | OUT | Ø MAX | ||
| G7250ITD.30 |
VARIABLE
SPEED |
10”-33” | 8”-30” | 50”
(1270 mm) |
| G7250ID.28 | 12”-30,5” | 10”-28” | ||
| G7250ID.26 | 12”-28,5” | 10”-26” | ||
| G7250ID.22 | 13”-24,5” | 11”-22” | ||
| G7250ID.20 | 12”-22,5” | 10”-20” | ||
|
46”
(1170 mm) |
||||
| G7246ID.26 |
12”-28,5” | 10”-26” | ||
| G7246ID.22 | 13”-24,5” | 11”-22” | ||
| G7246ID.20 | 12”-22,5” | 10”-20” | ||
|
2 SPEED
|
||||
| G7246IV.26 | 12”-28,5” | 10”-26” | ||
| G7246IV.22 | 13”-24,5” | 11”-22” | ||
| G7246IV.20 | 12”-22,5” | 10”-20” |
Technical data and composition presented in this web site may vary.Pictures reproduced are only indicative.
