Automatic leverless tyre changers

G1200.34 SLIM

AUTO-TOUCH Function

The AUTO-TOUCH is a unique and patented tool: it operates between rim and tyre and then, levering on the rim, progressively pulls up the bead, minimising the stress on the tyre.

The tool is made of plastic material to avoid any damage to the rim.

1. The tool operated between bead and rim.

2. Levering on the rim, the tool pulls
up the bead, minimising the stress.

3. The bead is progressively pulled up.

Wheel diameter up to 50"(it may be set up to 52"/54").

Rim diameter from 10" to 30" (it may be set with diameter up to 14" to 34").

Rim width up to 15".

Can operate on:

• both normal and reverse rims
• Run Flat
• SST
• BSR
• PAX

SELF-LOCKING PLATE

The central rim locking system, suitable also for reverse rims, consists of a central pin with cone.

The effort is minimal thanks to the special plate on which the wheel lays.

The plate is floating, therefore offering a self-locking mechanism.

WHEEL SENSOR

The bead-breaking is performed by means of two electronically controlled rollers:

• a sensor automatically activated the bead breaker, which operates in the correct position and not on the rim side;
• bead-breaking of both sides is quickly performed.

INVEMOTOR

The electrical motor is equipped with an exclusive and innovative inverter, which:

• allows to regulate the chucking table rotation speed by pressing the pedal
• slows down the rotation speed as the stress on the bead increases (to avoid any damage to the tyre)

G 1200.34 SLIM IT

Version with patented TOP inflation device.

Powerful and safe inflation:

• one hand operation;
• downward inflation flow, granting utmost safety;
• the draw back effect is reduced, thanks to patented system;
• a special safety device prevents accidental use against other people or objects.

Specifications